Shanghai Chase Industrial Co., Ltd. is one of the most reliable manufacturers and suppliers of forced circulation evaporator in China, also supports customized service. Welcome to buy industrial forced circulation evaporator at competitive price from our factory. For quotation, contact us now.
Chase Forced Circulation Evaporator is mainly used in vacuum low temperature evaporation and concentration process of liquid materials in beverage, food, Chinese and Western pharmaceutical, biochemical pharmaceutical, deep processing of agricultural and sideline products, fine chemical industry, light industry and other industries.
The equipment is not only suitable for solvent recovery of materials containing organic solvents (such as alcohol), but also suitable for low temperature evaporation concentration of sensitive fruit juices.
Characteristics of Forced Circulation Evaporator
Forced circulation evaporation solution circulation in the equipment mainly depends on the forced flow generated by external power. Ring speeds are generally up to 1.0-3.5 m/s. Large heat transfer efficiency and production capacity.
The raw material liquid is driven from bottom to top by the circulating pump and flows upward along the tube of the heating chamber.
The material does not evaporate in the heat exchanger, flash in the separator, the vapor is discharged from the upper part in the separator, the fluid is blocked and falls, the conical bottom is inhaled by the circulating pump, and then enters the heating tube, and continues to circulate.
Its heating chamber has horizontal and vertical two structures, the size of the liquid circulation speed is regulated by the pump.
The material liquid under the action of external force with high flow rate of operation, reduce the scale rate, enhance the turbulent state of the material liquid, at the same time in the outlet to ensure a certain amount of pressure head, can achieve the purpose of preventing evaporation in the heat exchanger.
Parameters of Forced Circulation Evaporator
Model | The evaporation capacity(L/H) | T/H | （kw） | Size(mm) |
CXP-NS-QW-4000L | 3000 | 900 | 90 | 8000×5000×8300 |
CXP-NS-QW-8000L | 4500 | 1300 | 120 | 12000×8000×8500 |
CXP-NS-QW-10000L | 6000 | 1800 | 150 | 13000×9000×9000 |
Process principle of forced external circulation evaporator
The principle of Forced Circulation Evaporator is in the vacuum state, continuous low temperature circulation heating, so that the material low temperature boiling evaporation of water, so as to maximize the protection of nutrients in the material and original taste.
The equipment adopts automatic control, each control point can achieve self-testing, using advanced pressure sensing detection technology, high precision liquid level control.
Hot Tags: forced circulation evaporator, China forced circulation evaporator manufacturers, suppliers, Falling Film Evaporator, Forced Circulation Evaporator, evaporators