Although the ultrafiltration technology started late in China, it has developed very rapidly. With the continuous promotion of this technology and the continuous improvement of people's understanding of it, the beverage production industry will definitely get more benefits from it.
Ultrafiltration membrane equipment has several different forms in industrial applications such as flat plate, tubular, spiral plate and hollow fiber. Most of the domestic applications are plate-shaped and tubular, especially hollow fiber membranes (hollow fiber membranes) have also been widely used in water treatment.
Hollow fiber ultrafiltration membrane is the most mature and advanced form of ultrafiltration technology. This kind of membrane is a thin film with a spatial three-dimensional geometry developed on the basis of a flat membrane, so that the membrane device per unit volume does not rely on an extremely thin semi-permeable membrane but has a great membrane penetration capacity. Hollow fiber tube walls are covered with micropores. The pore size is expressed in terms of relative molecular mass that can trap substances, and the molecular mass trapped can reach thousands to hundreds of thousands. Due to the hollow cylindrical configuration, the production capacity of the membrane infiltration equipment per unit volume is greatly improved. Raw water flows under pressure from the outside or inside of the hollow fiber, forming an external pressure type and an internal pressure type, respectively. Ultrafiltration is a dynamic filtration process. The trapped substances can be eliminated with the concentration, without blocking the membrane surface, and can be continuously operated for a long time. It can be proved that in the application of ultrafiltration, a cylindrical bundle of small-diameter hollow fiber membranes of reasonable size is used, and the amount of permeated liquid generated will be equivalent to that obtained on an ultra-thin square meter ultra-thin flat membrane.
The hollow fiber is an elongated membrane tube, the inner wall is a membrane layer, and the membrane layer is combined with a sponge-type outer wall, the outer wall has coarse pores, and the inner layer plays a role of ultrafiltration separation. The size of the intimal pores determines the size of the blocked substance in the tube. The hollow fiber has a diameter of about 200 μm, is made of inert non-ionic polymer, has a unique anisotropic (skin) structure, and has a significantly high flow rate.
