Project summary
A fruit processor in Guangxi commissioned a 6 T/H line for NFC mango pulp. The line was designed around two finished-product routes: aseptic bags for export and plastic bottles for frozen distribution to a leading Chinese tea beverage chain. Three washing stages were included to meet the project hygiene requirements before destoning and pulping.
Project photos

Project requirements
- Process fresh mangoes into NFC pulp at 6 T/H.
- Provide two finished-product routes: aseptic bags for export and plastic bottles for frozen domestic distribution.
- Improve cleaning, pulping and residue discharge while fitting the line into the existing workshop.
- Maintain high sanitation standards for mango pulp supplied to demanding beverage customers.
Customer challenge
The customer's previous pulping equipment did not process the mangoes or discharge residue consistently. The new line also had to fit the available workshop and serve two packaging routes without adding unnecessary manual handling. Because part of the frozen product would be supplied to a leading tea beverage chain, hygiene in the fruit preparation section was a particular concern.
Engineering response
Shanghai Chase tested mangoes supplied by the customer before finalizing the destoning and pulping section. The project uses three consecutive washing stages ahead of destoning to improve surface cleaning. Equipment placement was coordinated around the existing workshop, with access reserved for fruit sorting, residue discharge and cleaning. The downstream layout then separates the pulp into aseptic-bag and frozen-bottle routes.
Project outcome
Testing with the customer's mangoes confirmed the selected destoning and pulping arrangement, with more complete pulping and smoother residue discharge than the previous equipment. The line supports both commercial routes: aseptic bags for export and plastic bottles that are frozen for domestic beverage customers.
Related pages
Discuss your project
Mango variety, ripeness, target pulp condition, packaging format and workshop layout all affect equipment selection and line design.
Contact our engineering team